Model Name | Vantage NX |
Industry | Adhesives, Biomaterials, Corrugated, Foam, Foil, Nonwovens, Packaging Materials, Paper, Paperboard, Plastic Films, Rubber, Tissue, Textiles |
Testing Property | Tensile, Peel, Compression, COF, Cycling, Tear, Burst, ZDT, Flex/Bend, Stress Relaxation, Thickness, Insertion/Extraction, and more. |
Force Capacity | Varies by model from 5N (1.1 lbf) to 5kN (1125 lbf) |
Force Measurement | Interchangeable load cells range from 5N (1.1 lbf) to 5kN (1125 lbf) |
Force Accuracy | 10% to 100% Load Capacity: ±0.25% Measuring Value, Less than 10% Load Capacity: ±0.025% of Load Cell Capacity |
Force Resolution | 15 bit ADC (0.003% of 1.15 x Load Cell Capacity) |
Position Accuracy | ±6.4 micron/25 mm (± 0.00025/1.0 inch) or 0.025% of Distance |
Position Resolution | 1kN Frames: 0.17 μ (6.7 μin), 2kN Frames: 0.05 μ (2.1 μin), 5kN Frames: 0.11 μ (4.2 μin) |
Sample Frequency | Selectable: 50, 60, or 250 samples/second |
Crosshead Guidance | Precision Ball Screw |
Crosshead Speed | 1.3 to 1000 mm/min (0.05 to 40 in/min) |
Crosshead Speed Accuracy | 0.1 to 30 in/min: 1% of Set Speed, <0.1 in/min: 2% of Set Speed, >30 in/min: 2% of Set Speed |
Acceleration | 0.127 to 127 mm/sec2 (0.005 to 5 in/sec2) |
Maximum Power Consumption | 1kN & 2kN Frames: 0.6 VA, 5kN Single Column Frames: 1.5 VA, 5kN Dual Column Frames: 1.8 VA |
Power Requirements | 120-230 VAC ±10%, 50/60 Hz |
Operating Environment | Air Temperature – Operating: 10 to 50°C (50 to 122°F) |
Relative Humidity – Operating: 10% to 85% (Non-Condensing) | |
Storage Environment | Air Temperature – Storage: -25 to 70°C (-13 to 158°F) |
Relative Humidity – Storage: 5% to 90% (Non-Condensing) | |
Safety Features | Emergency Stop Button |
Upper and Lower Limit Switches with over-travel protection | |
Electronic Grip Collision Detection | |
Electronic Load Cell Overload Protection | |
Mechanical Load Cell Overload Protection: |
Universal Testing Machine
The VantageNX Tensile TesterThe VantageNX Universal Testing Machine is a powerful tool that can be equipped to meet a variety of materials testing needs. Many fixtures and grips are available for tensile testing, COF and other tests for the plastic film, flexible packaging, food packaging, paper, paperboard, tissue paper, textiles testing, and many other industries. This universal materials testing frame can be setup for many tests when combined with the right grips and fixtures.
Capacities – 1kN, 2kN & 5kN (10kN EJA Vantage Series)
Single & Dual Column Testing Frames
Windows compatible with MAP4 Software
Reviews
There are no reviews yet.